Kongsberg Simrad SN90 Reference Manual page 322

Purse seine and trawling sonar

Hide thumbs Also See for Simrad SN90:

Table of Contents

Simrad SN90 Reference Manual

The current bearing is shown with a solid line pointing out from the vessel position. You

can change the angle by means of the

select the bearing line and drag it sideways.

The bearing for the Vertical view is controlled by the bearing in the Horizontal view.

function controls the horizontal direction of the Vertical view and the beam

in each Inspection view.

• If you use a presentation mode with two horizontal views you can set

different values. Both bearings are shown as continuous lines pointing out from the

sonar position. Each bearing is shown with a solid line.

• If you use a presentation mode with two vertical views you can set the

function to two different values. Both bearing lines are shown in the Horizontal view.

The bearing for the Vertical view is shown with a solid line. The bearing for the

Vertical 2 view is shown with a dotted line.

By default, a new manually initiated tracked object is automatically given priority status.

The priority is identified with a "P". The bearing and tilt settings are automatically

adjusted to follow the movements of the tracked target. The bearing line is automatically

locked on the object to reflects its bearing.

Chapters

Table of Contents