Table of Contents
Advertisement
Simrad SN90 Reference Manual
2
Use the joystick to make the adjustment.
Tip
Optionally: Turn the relevant rotary switch to make the adjustment.
The Mk2 Operating Panel is fitted with three rotary switches. The switches are
identified with numbers. Each switch can be assigned a function related to range,
gain, bearing or tilt. Investigate the functionality provided on the
page. This page is located in the
Optionally:
3
In a Horizontal view, select the bearing line and drag it sideways.
Optionally:
4
Observe the
Main
Its default location is on the right side of the display presentation.
5
Select
.
Bearing
6
Make the necessary adjustment.
The following methods can be used to adjust this setting:
a
Select [+] or [-] to choose the requested setting.
b
Place the cursor on the button. Press and hold the left mouse button. Move the
cursor horizontally over the button. Release the mouse button when requested
value is shown.
c
Select the middle of the button to open it. If you have a keyboard connected to
the SN90 system, type the requested value.
7
Open the button and select
the views in the current presentation mode.
Related topics
Operating procedures, page 82
Controlling the gain and range settings, page 96
Bearing function, page 426
104
Installation
menu.
Apply to all
dialog box.
if you wish to use the chosen setting in all
Operating Panel
381294/E
Advertisement
Chapters
Table of Contents
