Kongsberg Simrad SN90 Reference Manual page 590

Simrad SN90 Reference Manual
Note
It is very important that the chosen communication port is not put to other use in
the page in the
I/O Setup
in use, neither communication ports must be used for any other purposes.
Related topics
Defining the user-selected features on the Operating Panel, page 175
Functions and dialog boxes, page 416
Setup menu: functions and dialog boxes, page 448
Operating Panel page, page 586
Operating Panel Mk2
The Mk2 Operating Panel is connected to the Processor Unit using an Ethernet cable.
The Operating Panel is provided with a built-in power supply.
Details
User Setting Buttons
On the Mk2 Operating Panel, the four buttons dedicated for user
settings or presentation modes are located the top of the panel.
Select
Mode Selection
for. Assign one predefined user setting or presentation mode to
each button on the Operating Panel.
588
dialog box. If you have two operating panels
Installation
to specify what you want to use the buttons
381294/E