Kongsberg Simrad SN90 Reference Manual page 179

• On the Mk2 Operating Panel, the four buttons dedicated for user settings or
presentation modes are located the top of the panel.
• On the Mk3 Operating Panel, the requested user setting or presentation mode is
chosen with a single button. Press the button repeatedly to cycle through the settings
or modes.
Tip
Any user setting selected on the Operating Panel is identified in the upper left corner of
the Horizontal view. The identifying number refers to the
page. Click on the text to make it larger. Click one more time to restore
Operating Panel
the original font size.
Procedure
1 Open the
Setup
2 On the menu, select
Setup
selected from the menu on the left side.
3 On the left side of the
4 Select the relevant operating panel.
5 Select
Mode Selection
6 Assign one predefined user setting or presentation mode to each button on the
Operating Panel.
7 At the bottom of the page, select
8 Continue your work in the
Related topics
Operating procedures, page 82
Defining the user-selected features on the Operating Panel, page 175
Operating Panel page, page 586
381294/E
menu.
Installation
dialog box, select
Installation
to specify what you want to use the buttons for.
Apply
Installation
User Setting
.
Observe that the
Installation
This dialog box contains a number of pages
Operating Panel
to save your settings.
dialog box, or select
Operating procedures
number on the
menu opens.
.
to close it.
OK
177