Kongsberg Simrad SN90 Reference Manual page 570

Purse seine and trawling sonar

Hide thumbs Also See for Simrad SN90:

Table of Contents

Simrad SN90 Reference Manual

• Rotation Around Z(Yaw)

In the user interface you will only need to specify the installation angles when the

parameters are shown.

Rotation Around X

Specify an angle (in degrees) to compensate for any deviation from the

X axis (fore-and-aft direction) in the vessel coordinate system.

Rotation Around Y

Specify an angle (in degrees) to compensate for any deviation from the

Y axis (athwartship direction) in the vessel coordinate system.

Rotation Around Z

Specify an angle (in degrees) to compensate for any deviation from the Z axis

(vertical direction) in the vessel coordinate system.

When you have set the parameters for a new sensor interface, select

it. Once a sensor has been added to the SN90 system configuration, it appears in

Installed Sensors

Installed Sensors

SN90 system. If you want to delete a sensor, select it in the list, and then select

at the bottom of the

You cannot undo this operation.

Installed Sensors

SN90 system. If you want to edit the parameters of a previously installed sensor,

select it in the list, and then select

Chapters

Table of Contents