Kongsberg Simrad SN90 Reference Manual page 42

Simrad SN90 Reference Manual
(F)
Cursor
The buttons offer menu and cursor control.
Cursor
Menu
This is an "on/off" function. Unless you need to make frequent changes to
the operating parameters, you may want to hide the menu from the display
presentation. This gives you more space for echo information. When the
menu is hidden, it is temporarily shown on the left or right side of the display
presentation if you move the cursor to that position.
Select
Press
Select
to the left button on a normal computer mouse.
View
The
View
to the middle button on a computer mouse
Object
The
Object
corresponds to the right button on a computer mouse
Trackball
Use the trackball to control the cursor in the user interface.
(G)
Tilt
The buttons allow you to control the vertical angle of the sonar beams.
Tilt
Manual
Press
Manual
arrow buttons.
Auto
This is an "on/off" function. When Auto Tilt mode is activated the beam will
automatically change its tilt angle for each transmission ("ping").
The centre of the tilt sector is defined by the chosen tilt angle just before the
Auto Tilt mode is started. The chosen tilt sector is shown on the tilt indicator
in the Horizontal view using a shaded background.
Sector limits are adjusted by pressing and holding the
simultaneously pressing the
(H)
Various
Use the
Various
Mute
The
Mute
It does not provide volume control. Use it to acknowledge audible alarms
and to acknowledge messages from the message system.
40
to make a selection in a menu or dialog box. This corresponds
button opens the shortcut menu in the active view. This corresponds
button opens the shortcut menu in the active view. This
to control the vertical angle of the sonar beams with the two
Tilt up
buttons to make screen captures and zoom in on details.
button on the Operating Panel enables or disables the audio output.
Auto
or (arrow) buttons
Tilt down
button and
381294/E