Kongsberg Simrad SN90 Reference Manual page 52

Simrad SN90 Reference Manual
While the transducer is moving the indicator lamp flashes, and an audible signal is
sounded. When the requested position has been reached, the indicator lamp is lit,
and the audible signal stops.
(C)
Rotary switches
Turn a rotary switch to apply a predefined function. To choose which function to
apply open the
function to each rotary switch on the Operating Panel.
(D)
Panel Backlight
Adjust the background illumination to suit your preferences and the ambient
light conditions.
(E) /
User Settings Presentation Modes
On the Mk3 Operating Panel, the requested user setting or presentation mode is
chosen with a single button. To choose which function to apply open the
page. Select
Panel
Press the button repeatedly to cycle through the settings or modes.
User Settings
Any user setting selected on the Operating Panel is identified in the upper
left corner of the Horizontal view. The identifying number refers to the
number on the
Setting
larger. Click one more time to restore the original font size.
Presentation Modes
All echoes offered by the SN90 system are shown in rectangular views.
Combinations of these views are organized in presentation modes. Each
presentation mode offered by the SN90 system provides a selection of
views in a predefined pattern. You must first find the presentation mode
that meets your operational requirements, then you can change the size of
the individual views.
(F)
Target Marker
During normal operation, some echoes are clearly more interesting than others. In
many situations specific echoes may be regarded as targets. To set up the SN90
system to provide such information, you can start target tracking.
Place the cursor over the echo you wish to track. Press
target is regarded as an object, and it is identified with a circle and two lines. The
bearing line is automatically locked on the object to reflects its bearing. By default,
a new manually initiated tracked object is automatically given priority status. If
another object has this priority, the status is transferred to the new object. The
priority is identified with a "P".
50
page. Under
Operating Panel
to specify what you want to use the button for.
Mode Selection
Operating Panel
Rotary Switch Options
page. Click on the text to make it
Target Marker
, assign one
Operating
User
. The tracked
381294/E