Kongsberg Simrad SN90 Reference Manual page 430

Simrad SN90 Reference Manual
Inspection views. When the beams are linked they all move simultanously. The
distance between each beam is fixed, and defined by the value you have chosen
for
Beam Spacing
You can link the inspection beams for both vertical and horisontal movements.
You can not link both tilt and bearing at the same time.
Beam Spacing
Select a value for
linked beams.
Apply to All
Check this box if you wish to use the chosen setting in all the Inspection views.
Related functionality
Operating Panel
The Mk1 Operating Panel offers separate
angle of the sonar beams as referenced to the vessel heading. (The Mk1 Operating
Panel is no longer provided with new sonars. This information is provided for
legacy reasons.)
The Mk2 Operating Panel is fitted with three rotary switches. The Mk3 Operating
Panel is fitted with two rotary switches. The switches are identified with numbers.
Each switch can be assigned a function related to range, gain, bearing or tilt. The
Operating Panel
This page is located in the
Microsoft Xbox Controller
This function can also be controlled from a Microsoft Xbox Controller connected
to the Processor Unit.
Related topics
Controlling the gain and range settings, page 96
Defining the user-selected features on the Operating Panel, page 175
Functions and dialog boxes, page 416
Main menu: functions and dialog boxes, page 417
428
.
to define the distance (in degrees) between the
Beam Spacing
page is used to assign functionality to the programmable buttons.
Installation
buttons to control of the horizontal
Train
dialog box.
381294/E