Kongsberg Simrad SN90 Reference Manual page 436

Simrad SN90 Reference Manual
Note
The data files will normally become very large. If you wish to record large amounts of
data, make sure that you have enough space on your hard disk. The SN90 system is not
provided with unlimited disk capacity. We recommend that you save the data files to an
external storage device.
The dialog box on the
Output
parameters. To define which disks and folders to use to save the data files, select
.
Setup
Ways to start and stop recording
You can start and stop data recording in several ways.
a Select the red circle on the right side of the
b Open the
Record RAW
c Select the black rectangle to stop recording.
The indicator on the top bar will switch to red colour when recording is active.
Record
The indicator can not be used to start or stop recording.
Record
Details
On/Off
You can use the "menu" under the
the middle of the button to open it, and select On or Off. For faster control, use the
right and left side of the
the right side. To stop recording, click the black rectangle on the left side.
Related functionality
Record
The indicator on the top bar shows you when recording has been
Record
activated.
Record Processed function
The
Record Processed
received by the transducer. Which processing to apply is controlled by the settings
on the
Processed Data to File
dialog box.
Recording dialog box
When the recording is stopped, the
the dialog box to add metadata to your recording.
Recording
File Setup page
The
File Setup
hard disk, or on an external storage device. You can select the disk and folder for
434
menu allows you to set up the recording
Operation
button and select On.
Record
button. To start recording, click the red circle on
Record
function allows you to record the processed echo data
page.
Processed Data to File
Recording
settings control how and where the recorded files are saved on the
button.
Record RAW
button to start and stop recording. Click
is located in the
dialog box opens automatically. Use
File
Output
381294/E