Table of Contents
Advertisement
Message types
Errors
These errors are serious. Operation of the SN90 system cannot continue. You must
turn off the SN90 system and attempt a restart.
System alarms
System alarm messages are related to the operation of the SN90 system or
significant software components. You can continue the operation, but the data
provided by the SN90 system may be inaccurate. A system restart is recommended.
Operational alarms
Operational alarms are messages related to environmental conditions, interfaces
or other events unrelated to software. Depending on the message nature, make
sure that all interfaces to the SN90 system are operational. A system restart may
be required.
Warnings
A warning is issued when an irregular event occurs. Depending on the nature of the
message, investigate what causes the warning. A restart is normally not required.
Information
An information messages is simply a notification of a minor operational event. No
corrective actions are required.
Details
Messages
The messages are listed in a table. For each message, the date and time of issue is
shown. The source of the information (for example a software function) is also
provided. This information is provided for support and maintenance use.
Current Message
The text in a message may be longer than the tabular view shows you. To read the
complete message, select it. The full text is then copied into the
box.
Mute Message Sound
Messages can be presented using an audible sound. The sound is only provided if
your Processor Unit is equipped with a loudspeaker. Select
to disable the audible signal.
Inhibit Dialog Popup
Select this option to prevent the
Note
When this option is enabled, you must keep an eye on the icon on the top bar, as
new messages will only be flagged using this icon.
381294/E
dialog box from opening automatically.
Messages
Functions and dialog boxes
Current Message
Mute Message Sound
503
Advertisement
Chapters
Table of Contents
