Kongsberg Simrad SN90 Reference Manual page 312

Simrad SN90 Reference Manual
Bottom Depth read-out
If enabled, the current water depth under the vessel is shown on the top bar.
Prerequisites
To see this information on the top bar, you must enable it by using the
in the
Display Options
dialog box is located on the
Description
To see a valid depth value on the top bar, you must set up your SN90 system to import
depth information from an echo sounder.
Note
The information shown on the top bar must not be used for vessel navigation.
By default, the depth is shown in metres. You can change the unit of measurement on the
page. The
Units Units
Related topics
User interface, page 294
Top bar, page 297
General page, page 527
Motion read-outs (roll and pitch)
When enabled, the navigational information on the top bar includes the vessel's current
roll and pitch movements.
Prerequisites
To see this information on the top bar, you must enable it by using the
in the
Display Options
dialog box is located on the
310
dialog box. Select
General
menu.
Display
page is located in the
dialog box. Select
General
menu.
Display
to open the page. The
dialog box.
Installation
to open the page. The
functions
Top Bar
Display Options
functions
Top Bar
Display Options
381294/E