Table of Contents
Advertisement
b
Unpack the ZIP file to access the executable application file.
c
Copy the application file to a USB flash drive.
2
Make the following preparations.
a
If applicable: Connect the keyboard and the mouse to USB sockets on the
Processor Unit.
b
Insert the USB flash drive.
3
Select
Power Off
4
In the
Power Off
SN90 program.
5
Uninstall the application.
a
From the
Start
b
In the Control Panel, select
c
Select
Programs and Features
d
On the list provided, locate the software you shall uninstall.
Refer to the Software changes chapter in the software release note to see which
applications that needs to be updated.
e
Select it, then select
f
Click the [X] in the top right corner to close the Control Panel.
6
Install the new version of the application.
a
From the Windows
b
Locate the executable setup file (
Refer to the Software changes chapter in the software release note to see which
applications that needs to be updated.
c
Copy the file to a temporary folder on the "C" drive.
d
Double-click on the file to install the new version of thew application.
e
Close File Explorer.
f
Remove the USB flash drive.
7
On the Processor Unit desktop, double-click the SN90 icon to start the program.
8
If applicable: Disconnect the keyboard and the mouse from the Processor Unit.
381294/E
on the top bar.
dialog box, select
Exit to Operating System
button in the lower left corner, open the Control Panel.
.
App
.
.
Uninstall
®
button, right-click to open File Explorer.
Start
).
.exe
Maintenance procedures
to close the
249
Advertisement
Chapters
Table of Contents
