Kongsberg Simrad SN90 Reference Manual page 342

Simrad SN90 Reference Manual
Cursor
The position (bearing and distance) and depth of the cursor's location is shown in the
lower right corner of the view. The depth is calculated from the current tilt and the
distance from the vessel.
Note
To read this information in the view's bottom right corner, you must enable it on the
page. This page is located in the
Cursor Readout
If you place the cursor over the tilt presentation in the upper left corner of the Horizontal
view you can use the scroll wheel to change the tilt.
Tracked target information / Priority marker information
A
B Cursor information / Manual track information
The tracked target is regarded as an object, and it is identified with a circle and two
C
lines. The two lines reflect the size of the current tracking area.
Marker
D
Related topics
User interface, page 294
Sonar views, page 316
Plane view, page 338
Gain
The current settings for range, gain and tilt are show in the lower left corner of the view.
Click on the text to make it larger. Click one more time to restore the original font size.
The purpose of the
Gain
By adjusting the gain you can control how much amplification the SN90 system applies
to the received echoes.
340
function is to adjust the echo level in the display presentations.
dialog box.
Display Options
381294/E