Table of Contents
Advertisement
Note
Each Operating Panel must have a different IP Address. None of the panels
must use the default IP Address.
f
Select
Apply IP Configuration
When the new IP Address has been set in the Operating Panel, you will loose
contact with the configuration page.
g
To re-establish contact, use the following URL in your
browser:
157.237.60.xx:5000
h
Select
Sonar PCs Configuration
i
Make sure that the IP and MAC Addresses to the Processor Unit are correct,
and that the Processor Unit is present on the list.
j
Close the web browser.
3
Connect and set up the secondary Operating Panel.
a
Connect the Operating Panel to the Ethernet switch.
b
On the Operating Panel, press
The blue indicator light in the button flashes while the Operating Panel
establishes contact with the Processor Unit. When you start the panel for the
first time the interface must be configured to establish this connection. When
the connection has been made, the blue indicator light is lit permanently.
c
On the Processor Unit desktop, open folder
d
Double-click the URL shortcut to open the Operating Panel configuration page
in the default web browser.
e
Select
SOP Configuration
f
In the
SOP IP
157.237.60.xx
The last digit "xx" in the IP Address can be any number between 21 and 29.
Note
Each Operating Panel must have a different IP Address. None of the panels
must use the default IP Address.
g
Select
Apply IP Configuration
When the new IP Address has been set in the Operating Panel, you will loose
contact with the configuration page.
h
To re-establish contact, use the following URL in your
browser:
157.237.60.xx:5000
i
Select
Sonar PCs Configuration
j
Obtain the IP address.
381294/E
.
on the top menu to open the page.
Power
on the top menu to open the page.
field, change the IP Address from the default value to:
.
on the top menu to open the page.
Maintenance procedures
, and keep it depressed for a few seconds.
SIMRAD-Shortcut
.
243
Advertisement
Chapters
Table of Contents
