Kongsberg Simrad SN90 Reference Manual page 310

Simrad SN90 Reference Manual
Description
If a positioning sensor (GPS) is connected to the SN90 system, the top bar can show you
the vessel's geographical position in longitude and latitude.
Note
The information shown on the top bar must not be used for vessel navigation.
Related topics
User interface, page 294
Top bar, page 297
General page, page 527
Heading read-out
When enabled, the vessel's current heading is shown on the top bar.
To see this information on the top bar, you must enable it by using the
in the
Display Options
dialog box is located on the
If a heading sensor (gyro compass) is connected to the SN90 system, the top bar may
show you the vessel's current heading.
Note
The information shown on the top bar must not be used for vessel navigation.
You can set up datagram priorities for both heading and course information on the
page. When enabled, the vessel's current heading is shown on the top
Configuration
bar. If the information from the heading sensor fails, the top bar will change to present
the course information instead.
Related functionality
General page (Display Options dialog box)
The page in the
General
menu. You can select which navigational information to be shown on the top bar.
You can also choose to see Coordinated Universal Time (UTC) at the bottom of
the presentation.
Sensor Configuration page (Installation dialog box)
With multiple sensors connected to the SN90 system, many of them will provide
the same datagrams. We cannot expect that these datagrams provide the same
information. The
308
dialog box. Select
General
menu.
Display
Display Options
Sensor Configuration
to open the page. The
dialog box controls the location of the
page allows you to define a datagram
functions
Top Bar
Display Options
Sensor
381294/E