Kongsberg Simrad SN90 Reference Manual page 387

Tx Power
Use to increase or decrease the output power. The output power is
Tx Power
selected from predefined steps.
Record RAW
allows you to record the unprocessed echo data received by the
Record RAW
transducer. You can save the data to the hard disk, or onto an external storage
device. The data files can be played back on the SN90 system. You can keep the
recorded files for future reference, training purposes and calibration.
Record Processed
The
Record Processed
received by the transducer. Which processing to apply is controlled by the settings
on the
Processed Data to File
dialog box.
Output
The purpose of the
output in one easily accessible location. The dialog box is organised in pages
grouping parameters for different parts of the application.
The following pages are provided:
File Setup
A useful function of the SN90 system is it ability to record echo data. To
retrieve the data files you need to know where they are, and which file names
that have been used. The purpose of
properties for the data files that you are recording. You can select the disk
and folder for the files, the maximum file size, and a prefix for the file names.
I/O Setup
To communicate with peripheral devices the Processor Unit offers several
serial and/or Ethernet (LAN) ports. The number of communication ports
depends on how your Processor Unit is set up and configured. For each port,
you can set up the communication parameters, and monitor the data flow.
Processed Data to File
The SN90 system can export several types of processed data file formats.
Use
Processed Data to File
and where to place the files. This page is located in the
Marker output
Use the
Output Marker
port.
381294/E
function allows you to record the processed echo data
page.
Processed Data to File
dialog box is to collect all functionality related to data
Output
to define which processed data formats to save,
page to export target markers to a communication
is located in the
is to define the file and folder
File Setup
Output
Menu system
Output
dialog box.
385