Kongsberg Simrad SN90 Reference Manual page 414

Simrad SN90 Reference Manual
Tip
On the
User Settings Setup
not want new tracked targets to become priority targets. This page is located in the
dialog box. To open the page, select
Installation
Place Marker
The
Place Marker
of the cursor. Each marker is shown as a small triangle with or without a short
identifying label.
Delete Marker
Delete Marker
.
Marker
Tip
The Operating Panel offers all necessary control functions for normal operation.
It further allows you to assign certain functions to dedicated buttons and switches.
The Mk2 Operating Panel is fitted with three function buttons. The Mk3 Operating
Panel is fitted with two rotary switches. Each of these can be assigned a specific
function.
Select
Delete Oldest Marker
marker from the sonar view.
This page is located in the
on the
Installation
Set Priority Marker
You can give priority status to one marker to identify the relevant object as the
most important target or position. If another object has this priority, the status is
transferred to the new object. The priority is identified with a "P". When a marker
is given priority it can be regarded as a position track. Relevant information about
the priority target can be found in the lower left corner of the view.
Place Own Ship Marker
Select
Place Own Ship Marker
position in the echo presentation. The own ship marker is now regarded as an
object. All information about the object is shown in the
"OSM".
Delete Own Ship Marker
Use
Delete Own Ship Marker
current view.
Place Marker Continuous
Place Marker Continuous
view to add new marker. Each click produces a new marker.
412
page, de-select
function allows you to create a marker at the current position
allows you to delete a marker from the current view. Select
to use the Operating Panel to remove the oldest
Installation
menu.
Setup
to add a square symbol to the vessel's current
on the shortcut menu to delete the marker from the
is an on/off switch. When enabled, left-click in a SN90
New Manually Initiated Track
Installation
dialog box. To open the page, select
Objects
if you do
on the menu.
Setup
Delete
menu listed as
381294/E