Kongsberg Simrad SN90 Reference Manual page 328

Simrad SN90 Reference Manual
Tilt
The current settings for range, gain and tilt are shown in the upper left corner of the view.
Click on the text to make it larger. Click one more time to restore the original font size.
When you change the tilt a dotted line presents the requested tilt while the solid line
presents the actual tilt. You can change the tilt angle by means of the function on
Tilt
the menu. You can also click on the tilt line in a Vertical view and drag it up and
Main
down. If you place the cursor over the tilt presentation in the upper left corner of the
Horizontal view you can use the scroll wheel to change the tilt.
Related topics
User interface, page 294
Sonar views, page 316
Horizontal view, page 318
Horizontal TX Sector
In a horizontal swath the SN90 system transmits with a maximum horizontal opening
angle of 160 degrees.
Using the function, you can change this opening angle to 90, 120
Horizontal Tx Sector
degrees.
Related topics
User interface, page 294
Sonar views, page 316
Horizontal view, page 318
User settings
Any user setting selected on the Operating Panel is identified in the upper left corner
of the Horizontal view.
The identifying number refers to the number on the page.
User Setting Operating Panel
Click on the text to make it larger. Click one more time to restore the original font size.
Related topics
User interface, page 294
Sonar views, page 316
Horizontal view, page 318
326
381294/E