Power Up The Server; Hardware Options Installation - HPE ProLiant ML110 Gen11 User Manual

5. If the front bezel is installed and you are planning to install the hot-pluggable component on the front panel, extend the server with
sufficient space for opening the front bezel.
6. Connect all peripheral cables to the server.
7. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.

8. Power up the server.

Power up the server Power up the server
Procedure Procedure
Press the Power On/Standby button.
Use the virtual power button through iLO 6.

Hardware options installation

Hardware options installation
This chapter provides instructions for installing supported hardware options. To ensure proper server deployment and operation, Hewlett
Packard Enterprise recommends installing only HPE‑validated hardware options. To see the list of validated options for this server, see the
product QuickSpecs on the HPE ProLiant ML110 Gen11 Server website:
https://buy.hpe.com/us/en/p/1014705725 https://buy.hpe.com/us/en/p/1014705725
To view the warranty for your server and supported options, see Warranty information.
Subtopics Subtopics
Server data backup Server data backup
HPE ProLiant ML110 Gen11 Server User Guide 63