Table of Contents
Advertisement
10. Install the system battery:
a. With the side of the battery showing the "+" sign facing up, insert the battery into the socket.
b. Press the system battery down until it clicks into place.
11. Install the full-height full-length expansion card .
12. Make sure that all the system cables that are routed through the front cable channel are properly secured in the metal cable tabs and
cable clamps.
13. Install the riser cage.
14. Install the system air baffle .
15. Install the access panel .
16. Do one of the following:
Orient the server back to tower mode.
Install the server into the rack.
17. Connect all peripheral cables to the server.
HPE ProLiant ML110 Gen11 Server User Guide
207
Advertisement
Table of Contents
