c. Remove the blank.
10. Install the type-o storage controller:
a. Rotate the locking pin to the open (vertical) position.
b. Slide the controller into the bay until it clicks into place.
Make sure that the controller is seated firmly in the slot.
c. Rotate the locking pin to the close (horizontal) position.
11. Cable the type-o storage controller .
12. To enable the FBWC feature of the storage controller, install an energy pack.
13. Install the system fan:
a. Insert the fan guard pins into the chassis openings.
b. Tighten the screws on the chassis.
Default system fan
HPE ProLiant ML110 Gen11 Server User Guide
130