HPE ProLiant ML110 Gen11 User Manual page 81

6. Install the server into the rack.
Install the server Install the server into the into the rack
Prerequisites Prerequisites
Get help to lift and stabilize the server during rack installation. If the
might be required to help install the server might be required to help install the
Before you perform this procedure, review the:
Rack warnings and cautions
Server warnings and cautions
Space and airflow requirements
A fully populated server is heavy. Hewlett Packard Enterprise recommends removing the external chassis components before installing
the server into a rack.
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure Procedure
1. Grasp the tray notch to slide the tray out of the rack.
rack
If the server
server: : One person to support the server weight, and the other to slide the server into the rack.
server is installed higher than chest level, an additional person is installed higher than chest level, an additional person
HPE ProLiant ML110 Gen11 Server User Guide 81