Table of Contents
Advertisement
7. If installed, remove the riser cage.
8. If you are installing the second single-width accelerator, install the secondary riser option on the riser cage .
9. To install the first accelerator in the riser cage, do the following:
a. Remove the riser slot 2 screw.
Retain the screw. This screw will be used to install the PCI air baffle.
b. Install the first accelerator in the riser slot 2.
Make sure that the accelerator is firmly seated in the riser.
HPE ProLiant ML110 Gen11 Server User Guide
147
Advertisement
Table of Contents
