Dimm Installation Guidelines; Installing A Dimm - HPE ProLiant ML110 Gen11 User Manual

HPE SmartMemory speed and population information HPE SmartMemory speed and population information
For information about memory speed and server-specific DIMM population rules for HPE servers using 4th Gen Intel Xeon Scalable
Processor, see the relevant memory technical paper in:
https://www.hpe.com/docs/server-memory https://www.hpe.com/docs/server-memory

DIMM installation guidelines

DIMM installation guidelines
When handling a DIMM, observe the following:
Observe antistatic precautions.
Handle the DIMM only along the edges.
Do not touch the components on the sides of the DIMM.
Do not touch the connectors on the bottom of the DIMM.
Never wrap your fingers around a DIMM.
Never bend or flex the DIMM.
When installing a DIMM, observe the following:
To align and seat the DIMM, use two fingers to hold the DIMM along the side edges.
To seat the DIMM, use two fingers to apply gentle pressure along the top of the DIMM.
For more information, see the Hewlett Packard Enterprise website (https://www.hpe.com/support/DIMM-20070214-CN

Installing a DIMM

Installing a DIMM
Prerequisites Prerequisites
Before you perform this procedure, review the:
HPE SmartMemory speed and population information
DIMM installation guidelines
About this task About this task
CAUTION: CAUTION:
Do not install ×4 and ×8 DRAM widths in the same server. All memory installed in the server must be of the same type.
Installing different DIMM types can cause the server to halt during BIOS initialization.
CAUTION: A discharge of static electricity from a finger or other conductor might damage system boards or other static- CAUTION:
sensitive devices. To prevent damage, observe antistatic precautions.
Procedure Procedure
1. Back up all server data.
2. Power down the server.
3. Remove all power:
https://www.hpe.com/support/DIMM-20070214-CN).
HPE ProLiant ML110 Gen11 Server User Guide 113