Table of Contents
Advertisement
13. Make sure that all the system cables that are routed through the front cable channel are properly secured in the metal cable tabs and
cable clamps.
14. Install the system air baffle .
15. Install the access panel .
16. Do one of the following:
Orient the server back to tower mode.
Install the server into the rack.
17. Connect all peripheral cables to the server.
18. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
19. Power up the server.
20. Update the server and controller firmware if they are not the latest revision .
21. Configure the controller .
Results
Results
The installation is complete.
Installing the type-o storage controller
Installing the type-o storage controller
Prerequisites
Prerequisites
To enable the flash-backed write cache (FBWC) feature of a storage controller option, install an energy pack.
For more information on the controller caching feature, see the controller QuickSpecs on the Hewlett Packard Enterprise website
(https://www.hpe.com/info/qs
https://www.hpe.com/info/qs).
HPE ProLiant ML110 Gen11 Server User Guide
127
Advertisement
Table of Contents
