HPE ProLiant ML110 Gen11 User Manual page 115

10. Make sure that all the system cables that are routed through the front cable channel are properly secured in the metal cable tabs and
cable clamps.
11. Install the system air baffle .
12. Install the access panel .
13. Do one of the following:
Orient the server back to tower mode.
Install the server into the rack.
14. Connect all peripheral cables to the server.
15. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
16. Power up the server.
17. To configure the memory settings:
a. From the boot screen, press F9 F9 to access UEFI System Utilities.
b. From the System Utilities screen, select System Utilities > System Configuration > BIOS/Platform Configuration (RBSU) > Memory
Options.
Results Results
The installation is complete.
Riser cage and secondary riser option Riser cage and secondary riser option
This server supports one riser cage option for standard and high-power expansion card options.
The riser cage option supports two PCIe5 x16 riser boards.
For more information on the riser slot, see Riser board components .
HPE ProLiant ML110 Gen11 Server User Guide 115