HPE ProLiant ML110 Gen11 User Manual page 37

When the embedded TPM is enabled, the Trusted Platform Module operates in TPM 2.0 mode.
Use the UEFI System Utilities to configure the TPM. From the System Utilities screen, select System Configuration > BIOS/Platform
Configuration (RBSU) > Server Security > Trusted Platform Module options. For more information, see the UEFI user guide:
https://www.hpe.com/support/UEFIGen11-UG-en https://www.hpe.com/support/UEFIGen11-UG-en
When using the Microsoft Windows BitLocker Drive Encryption feature, always retain the recovery key or password. The recovery key or
password is required to enter Recovery Mode after BitLocker detects a possible compromise of system integrity.
HPE is not liable for blocked data access caused by improper TPM use. For operating instructions, see the documentation for the
encryption technology feature provided by the operating system.
BitLocker recovery key/password retention guidelines BitLocker recovery key/password retention guidelines
The recovery key/password is generated during BitLocker setup, and can be saved and printed after BitLocker is enabled. When using
BitLocker, always retain the recovery key/password. The recovery key/password is required to enter Recovery Mode after BitLocker detects
a possible compromise of system integrity.
To help ensure maximum security, observe the following guidelines when retaining the recovery key/password:
Always store the recovery key/password in multiple locations.
Always store copies of the recovery key/password away from the server.
Do not save the recovery key/password on an encrypted drive.
HPE NS204i-u Boot Device components HPE NS204i-u Boot Device components
HPE ProLiant ML110 Gen11 Server User Guide 37