HPE ProLiant ML110 Gen11 User Manual page 151

T-10 Torx screwdriver
Phillips No. 1 screwdriver
CAUTION: A discharge of static electricity from a finger or other conductor might damage system boards or other static- CAUTION:
sensitive devices. To prevent damage, observe antistatic precautions.
Procedure Procedure
Installing drives onto the boot device Installing drives onto the boot device
1. Remove the boot device carrier:
a. Press and hold the carrier latch.
b. Pivot the latch to open.
c. Slide the carrier out from the boot device cage.
2. Install the SSD on the boot device carrier:
a. Remove the SSD mounting screw.
b. Insert the SSD into the M.2 slot at a 45° angle.
c. Carefully press the SSD down to the horizontal position.
d. Install the SSD mounting screw.
HPE ProLiant ML110 Gen11 Server User Guide 151