Operations; Power Up The Server; Power Down The Server - HPE ProLiant DL380 Gen11 User Manual

Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an authorized reseller install the part.
For more information on static electricity or assistance with product installation, contact an authorized reseller.

Operations

Operations
Subtopics Subtopics

Power up the server

Power up the server

Power down the server

Power down the server
Extend the server from the rack Extend the server from the rack
Remove the server from the rack Remove the server from the rack
Remove the bezel Remove the bezel
Remove the access panel Remove the access panel
Installing the access panel Installing the access panel
Remove the fan cage Remove the fan cage
Install the fan cage Install the fan cage
Remove the air baffle or midplane drive cage Remove the air baffle or midplane drive cage
Install the air baffle Install the air baffle
Remove the riser cage Remove the riser cage
Releasing the cable management arm Releasing the cable management arm
Accessing the Systems Insight Display Accessing the Systems Insight Display
Power up the server Power up the server
About this task About this task
To power up the server, use one of the following methods:
Press the Power On/Standby button.
Use the virtual power button through iLO.
Power down the server Power down the server
Before powering down the server for any upgrade or maintenance procedures, perform a backup of critical server data and programs.
IMPORTANT: IMPORTANT:
When the server is in standby mode, auxiliary power is still being provided to the system.
To power down the server, use one of the following methods:
HPE ProLiant DL380 Gen11 Server User Guide 37