HPE ProLiant ML110 Gen11 User Manual page 159

11. Connect the system fan cable .
12. Make sure that all the system cables that are routed through the front cable channel are properly secured in the metal cable tabs and
cable clamps.
13. Install the system air baffle .
14. Install the access panel .
15. Do one of the following:
Orient the server back to tower mode.
Install the server into the rack.
16. Connect all peripheral cables to the server.
17. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
18. Power up the server.
Results Results
The installation is complete.
Chassis intrusion detection switch option Chassis intrusion detection switch option
The chassis intrusion detection switch enables iLO to record an event in the Integrated Management Log (IML) whenever the access panel is
physically opened or removed. An alert is also sent to the BIOS whenever a chassis intrusion is detected. The chassis intrusion detection
occurs as long as the server is plugged in, regardless of whether the server is powered on or off.
Subtopics Subtopics
Installing the chassis intrusion detection switch Installing the chassis intrusion detection switch
HPE ProLiant ML110 Gen11 Server User Guide 159