Table of Contents
Advertisement
8. Remove the serial port blank:
a. Use a plastic spudger to pry the blank from the rear panel.
b. Remove the blank.
9. Install the serial port:
a. Insert the serial port into the rear panel opening.
b. Install the hex screws.
10. Make sure that all the system cables that are routed through the front cable channel are properly secured in the metal cable tabs and
cable clamps.
11. Install the riser cage.
12. Install the system air baffle .
13. Install the access panel .
14. Do one of the following:
Orient the server back to tower mode.
Install the server into the rack.
15. Connect all peripheral cables to the server.
HPE ProLiant ML110 Gen11 Server User Guide
163
Advertisement
Table of Contents
