HPE ProLiant ML110 Gen11 User Manual page 39

Item Item LED LED
1 Fault/Locate
2 Online/Activity
Setup Setup
This chapter describes general operational requirements and safety reminders, as well as the initial setup procedure for the server.
Subtopics Subtopics
Initial system installation Initial system installation
Operational requirements Operational requirements
Status Status Definition Definition
Solid amber Drive has failed, unsupported, or invalid.
Solid blue Drive is operating normally and being identified by a management
application.
Flashing amber/blue (1 Drive has failed, or a predictive failure alert is received for the drive. The
flash per second) drive has also been identified by a management application.
Flashing amber (1 flash per Drive predictive failure alert is received. Replace the drive as soon as
second) possible.
Off Drive is operating normally and is not identified by a management
application.
Solid green Drive is online and has no activity.
Flashing green (1 flash per Drive is doing one of the following:
second)
Flashing green (4 flashes Drive is operating normally and has activity.
per second)
Off Drive is not configured by a RAID controller or is a spare drive.
Rebuilding or performing a RAID
Erasing
HPE ProLiant ML110 Gen11 Server User Guide 39