8. Make sure that all the system cables that are routed through the front cable channel are properly secured in the metal cable tabs and
cable clamps.
9. Install the system air baffle .
10. Install the access panel .
11. Do one of the following:
Orient the server back to tower mode.
Install the server into the rack.
12. Connect all peripheral cables to the server.
13. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
14. Power up the server.
Results
Results
The installation is complete.
Serial port option
Serial port option
Install the serial port option to enable communication to physical serial devices. You can also use the serial connection to remotely access the
system BIOS and view POST error messages.
Subtopics
Subtopics
Installing a serial port
Installing a serial port
HPE ProLiant ML110 Gen11 Server User Guide
161