HPE ProLiant ML110 Gen11 User Manual page 56

CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or blanks CAUTION:
installed. If the server supports hot-plug components, minimize the amount of time the access panel is open.
Procedure Procedure
1. If the riser cage is not installed, reassemble the DIMM air baffle in the system air baffle:
a. Attach the DIMM air baffle on the system air baffle.
b. Pivot the DIMM air baffle.
Make sure that the DIMM air baffle latches are locked on the system air baffle.
2. Make sure that all the system cables that are routed through the front cable channel are properly secured in the metal cable tabs and
cable clamps.
3. Install the system air baffle.
Make sure that the alignment hooks are locked on the chassis.
HPE ProLiant ML110 Gen11 Server User Guide 56