Table of Contents
Advertisement
Port
Select the COM port on your computer where the connection
to the analyzer is installed.
Baud Rate
Select the baud rate at which data will be transferred.
RS-232 Port
Click if the analyzer is connected to an RS-232 port.
RS-485 Port
Click if the analyzer is connected to an RS-485 port.
Address
Type the network address to which the analyzer is con-
nected.
Saving Your Settings
To save PC Communications settings, click OK.
To abort changes you have made, click Cancel.
Device
Refer to Figure 6-1.
Name
Type in a name for the analyzer.
Description
Type in a description for the analyzer.
Save Configuration button
Save the analyzer's internal parameters to a file. The Save As
dialog box opens so that you can name and save the file.
Restore Configuration button
Restore the analyzer's internal parameters from a file. The
Open dialog box appears so that you can select and open the
file.
The Restore Configuration button can also be used to restore the analyzer
communication parameters.
NOTE
Live Data
Checked
The system connects to and uses live data from the ana-
lyzer.
Not checked
The system uses demonstration data.
Configurator Software Setup | 6-3
Advertisement
Table of Contents
