Exchanging a Lamp
When required
Tools required
Parts required
Preparations
If the detector has been in use, the lamp may be hot. If so, wait five minutes until lamp
C A U T I O N
cools down.
1
Press the release buttons and remove the front cover to
have access to the lamp area.
1100 Series DAD and MWD User Manual
If noise or drift exceeds application limits or lamp does not ignite
Screwdriver POZI 1 PT3
Longlife Deuterium lamp "C" 2140-0820 (with black cover and I.D. tag)
Tungsten lamp G1103-60001
Turn the lamp(s) off.
2
Disconnect lamp from the connector, unscrew the
Vis-lamp (left) and/or UV-lamp (right) and remove the
lamp. Do not touch the glass bulb with your fingers.
Maintenance
8
119