Agilent Technologies 1100 Series User Manual page 146

8 Maintenance
4
While releasing the holder with a screw driver, carefully
insert the holmium oxide filter.
Next steps:
6
Perform a holmium oxide test, see
of the holmium oxide filter.
7
Insert the flow cell, see
8
Replace the front cover.
9
Turn on the flow.
146
"Holmium Oxide Test"
"Exchanging a Flow Cell"
5
Replace the flow cell cover and fix the six screws.
as described in the Service Manual to check the proper function
on page 121.
1100 Series DAD and MWD User Manual