Agilent Technologies 1100 Series User Manual page 70

4 Using the Detector
Figure 39
13 If both baselines are stable, set the Y-range for the detector signal to
If you start with a new UV-lamp for the first time, the lamp may show initial drift for some
N O T E
time (burn-in effect).
70
The Online Plot (Figure 39
the detector absorbance signals. Pressing Adjust the signals can be reset to
the offset value and Balance would do a balance on the detector.
Online Plot Window
100 mAU.
on page 70) shows both, the pump pressure and
Pump pressure signal
DAD absorbance signal
1100 Series DAD and MWD User Manual