4
Using the Detector
4 Turn on the detector lamp, pump and autosampler by clicking the System
Figure 33
5 Purge the pump. For more information see
64
On button or the buttons below the module icons on the graphical user
interface (GUI). After some seconds, the pump and detector module will
turn to green
Turning on the HPLC Module
System"
on page 58.
After turn on:
The detector status
green (lamp(s)
ignited).
The System status is
green (Ready).
"Priming and Purging the
1100 Series DAD and MWD User Manual