Agilent Technologies 1100 Series User Manual page 77

Automated Run Recovery in case of temporary communication failures
Table 14 Automated Run Recovery in case of temporary communication failures
Situation
• All OK
• LAN breaks
• LAN recovers
• Stop time elapsed
• Run ends
If the detector status window is not opened, you will realize only the Power Fail error and
N O T E
the long Run In Progress information until the data is recovered from disk.
1100 Series DAD and MWD User Manual
Reaction
• Run in progress - Data Analysis
• Run / Rawdata
• Elapsed run time is running
• Spectra counter is running
• Data are stored on PC and on card
• Run in progress - Data Analysis
• Run / Rawdata
• Error Power Fail
• Elapsed run time stops
• Spectra counter stops
• Data continues to be stored on card
• Run in progress - Data Analysis
• Run / Rawdata
• Error Power Fail cleared
• Elapsed run time continues at actual time
• Spectra counter continues
• Data continues to be stored ion PC and on card
• ChemStation tries already to add missing data
(depends on the data load).
• Run in progress - Data Analysis
• Prerun / Rawdata
• Elapsed run time stops
• Spectra counter continues
• ChemStation continues to ads missing data
• Ready
• Run finished
• Prerun / Ready
Using the Detector
On ChemStation
4
77