Agilent Technologies 1100 Series User Manual page 17

Table 2 Performance Specifications Agilent 1100 Series DAD and MWD, continued
Type
Analog outputs
Communications
Safety and maintenance
GLP features
Housing
ASTM: "Standard Practice for Variable Wavelength Photometric Detectors Used in Liquid
N O T E
Chromatography".
Reference conditions: cell path length 10 mm, response time 2 s, flow 1 ml/min LC-grade
Methanol, slit width 4 nm.
Linearity measured with caffeine at 265 nm.
For environmental conditions refer to
1100 Series DAD and MWD User Manual
Specification
Recorder/integrator: 100 mV or 1 V, output range
0.001 – 2 AU, two outputs
Controller-area network (CAN), RS-232C, APG
Remote: ready, start, stop and shut-down signals,
LAN
Extensive diagnostics, error detection and display
(through control module and ChemStation), leak
detection, safe leak handling, leak output signal
for shutdown of pumping system. Low voltages in
major maintenance areas.
Early maintenance feedback (EMF) for continuous
tracking of instrument usage in terms of lamp
burn time with user-setable limits and feedback
messages. Electronic records of maintenance and
errors. Verification of wavelength accuracy with
built-in holmium oxide filter.
All materials recyclable.
Site Requirements and Specifications
Comments
"Environment" on page 13.
1
17