Agilent Technologies 1100 Series User Manual page 44

3 LAN Configuration
When using this Bootp mode, the parameters are not written into the non-volatile memory
N O T E
of the detector. If you delete this Bootp Configuration, the Bootp Manager will show up as
shown in
If you want to store your parameters permanently on the detector (for use without the
Agilent Bootp service), refer to
44
Figure 13 on page 41 (Bootp mode).
"Storing the settings permanently with Bootp"
1100 Series DAD and MWD User Manual
on page 45.