Correcting Leaks
When required
Tools required
Parts required
Preparations
1 Use tissue to dry the leak sensor area and the leak pan.
2 Observe the capillary connections and the flow cell area for leaks and
Leak pan
Leak sensor assembly
Figure 66
3 Replace the front cover.
1100 Series DAD and MWD User Manual
If a leakage has occurred in the flow cell area or at the heat exchanger or at
the capillary connections
Tissue
Two 1/4 inch wrenches for capillary connections
None
Remove the front cover.
correct, if required.
Observing for Leaks
Maintenance
8
147