Agilent Technologies 1100 Series User Manual page 26

2 Installing the Detector
The detector is turned on when the line power switch is pressed and the green indicator
N O T E
lamp is illuminated. The detector is turned off when the line power switch is protruding and
the green light is off.
To disconnect the detector from line, unplug the power cord. The power supply still
WA R N I N G
uses some power, even if the power switch at the front panel is turned off.
The detector was shipped with default configuration settings. To change these settings see
N O T E
"Configuration Switches"
26
on page 34.
1100 Series DAD and MWD User Manual