Agilent Technologies 1100 Series User Manual page 175

Control Module Screens 10
Settings
Within the Settings you can change the DAD or MWD parameters and with a
different set of parameters available through the F1-5 keys. F7 key resets the
DAD or MWD to default values. F8 opens a window to turn on the lamps.
Use the m-key for the context sensitive menu. The Status command pulls up a
monitor screen displaying signals and spectra as programmed. Reset will load
the DAD or MWD default parameters. Balance brings the baseline back to set
offset.
1100 Series DAD and MWD User Manual 175