Replacing The Compactflash Card - Agilent Technologies 1100 Series User Manual

Replacing the CompactFlash Card

When required
Tools required
Parts required
Preparations
The detector is equipped with a CompactFlash card. This CompactFlash card is required for
N O T E
the operation of the detector (data buffering). DO NOT use other types of CompactFlash
cards. Only CompactFlash cards supplied with the detector or as replacement with above
part number are tested with the detector.
1 Remove the CompactFlash card by pulling it out of its slot in the rear of the
2 Install the new CompactFlash card into the slot.
3 Turn the detector ON.
Figure 68
1100 Series DAD and MWD User Manual
If defective
None
CompactFlash Card Kit 01100-68700
Turn the detector OFF and have access to the rear of the detector.
detector.
Replacing SanDisk CompactFlash card
Maintenance 8
149