4
Using the Detector
7 For the isocratic pump, fill the solvent bottle with the mixture of
8 Click on the Load Method button and select
Figure 35
66
HPLC-grade bi-distilled water (30 %) and acetonitrile (70 %). For binary-
and quaternary pumps you can use separate bottles.
default LC method parameters are transferred into the 1100 modules.
Loading Default LC Method
DEF_LC.M
and press OK. The
After turn on:
The detector status
green (lamp(s)
ignited).
The System status is
green (Ready).
1100 Series DAD and MWD User Manual