Safety; Symbols Used; Warnings - MICRO-EPSILON confocalDT IFD2410 Series Operating Instructions Manual

Safety

1. Safety
System operation assumes knowledge of the operating instructions.
1.1

Symbols Used

The following symbols are used in these operating instructions:
CAUTION
Indicates a hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE
Indicates a situation that may result in property damage if not avoided.
Indicates a user action.
i
Indicates a tip for users.
Measurement
Indicates hardware or a software button/menu.
1.2

Warnings

Connect the power supply and the display/output device according to the safety regulations for elec-
CAUTION
trical equipment.
> Risk of injury
> Damage to or destruction of the controller
The surface of the sensors or controller heats up to a temperature of over 50°C when all interfaces
are used.
> Risk of injury
The supply voltage must not exceed the specified limits.
NOTICE
> Damage to or destruction of the controller
Avoid shocks and impacts to the controller and the sensor.
> Damage to or destruction of the components
Never fold the optical fiber and do not bend it in tight radii.
> Damage to or destruction of the optical fiber, failure of measuring device
Protect the ends of the optical fiber against contamination (use protective caps).
> Incorrect measurement
> Failure of the measuring device
Protect the cables against damage.
> Failure of the measuring device
confocalDT IFD2410/2411/2415 Page 9