Decommissioning, Disposal - MICRO-EPSILON confocalDT IFD2410 Series Operating Instructions Manual

Decommissioning, Disposal

13. Decommissioning, Disposal
To prevent environmentally harmful substances from being released and to ensure the reuse of valuable raw materials,
please note the following rules and obligations:
- All cables must be removed from the sensor and/or controller.
- The sensor and/or controller, its components and the accessories, as well as the packaging materials, are to be dis-
posed of according to the country-specific waste treatment and disposal regulations for the respective area of use.
- You are obligated to observe all relevant national laws and provisions.
The following (disposal) instructions apply in Germany / the EU:
- old devices labeled with a crossed-out garbage can must not be disposed of in normal waste
(e.g. garbage can or yellow bin) and must be disposed of separately. This prevents hazards to
the environment due to improper disposal and proper further use of the old devices is ensured.
- A list of national legislation and contacts in EU Member States can be found at
ics/waste-and-recycling/waste-electrical-and-electronic-equipment-weee_en. Here you have the opportunity to learn
about the respective national collection and return points.
- Old devices can also be sent back to MICRO-EPSILON for disposal, to the address provided in the Legal Notice at
https://www.micro-epsilon.com/impressum/
- Please note that you yourself are responsible for deleting the measurement-specific and personal data from the old
devices being disposed of.
- We are registered as a manufacturer of electrical and/or electronic devices under registration number WEEE-Reg.-Nr.
DE28605721 with Stiftung Elektro-Altgeräte Register, Nordostpark 72, 90411 Nuremberg.
confocalDT IFD2410/2411/2415
.
https://ec.europa.eu/environment/top-
Page 136