Safety; Symbols Used; Warnings - MICRO-EPSILON surfaceCONTROL 3D SC3200-80 Operating Instructions Manual

Safety

1. Safety
The handling of the sensor assumes knowledge of the operating instructions.
1.1

Symbols Used

The following symbols are used in this operating instructions:
Indicates a hazardous situation which, if not avoided, may result in minor or moderate injury.
Indicates a situation that may result in property damage if not avoided.
Indicates a user action.
i
Indicates a tip for users.
Measure
Indicates hardware or a software button/menu.
1.2

Warnings

Do not look directly into the light source of the sensor.
> Risk of injury, damage to the eyes and skin
Connect the power supply and the display/output device according to the safety regulations for
electrical equipment.
> Risk of injury
> Damage to or destruction of the sensor
Avoid shocks and impacts to the sensor.
> Damage to or destruction of the sensor
The supply voltage must not exceed the specified limits.
> Damage to or destruction of the sensor
Avoid constant exposure of the sensor to dust or splashes of water by appropriate methods such as
blowing or using a protective housing.
> Damage to or destruction of the sensor
Do not touch the protective windows of the optics. Wipe off any fingerprints immediately with pure
alcohol and a clean cotton cloth with no streaks.
> Failure of the measuring device
Protect the cables against damage.
> Failure of the measuring device
The sensor housing may only be opened by authorized persons.
> Damage to or destruction of the sensor
Do not plug or unplug devices during the operation.
surfaceCONTROL 3D SC3200 / SC3210 Page 5